Get your Firestone Adhesives & Sealants at Roofmart

Share:

Firestone Adhesives and Sealants Banner

Adhesives

Multi-Purpose MB Cold Adhesive
Firestone Multi-Purpose MB Cold Adhesive consists of an asphalt matrix with non-asbestos fibers and performance additives designed to meet adhesion characteristics necessary for horizontal applications of select Firestone Base Sheets, Cap Sheets, and as a lap adhesive in two-ply SBS or APP Cool Systems.
For more information and product specs click here.

Firestone UltraPly™ Bonding Adhesive
UltraPly™ Bonding Adhesive
Firestone UltraPly™ Bonding Adhesive is a solvent based contact adhesive designed specifically for bonding Firestone UltraPly™ TPO membranes to approved insulations in addition to wood, metal, masonry and other acceptable substrates.
For more information and product specs click here.

Firestone Bonding Adhesive
XR Bonding Adhesive
XR Bonding Adhesive is designed for bonding UltraPly™ TPO XR membrane to various insulation surfaces, specific existing roof surfaces, as well as wood, metal, masonry, and other acceptable substrates following the Application Method one (I) in the link below. XR Bonding Adhesive may also be used with standard UltraPly™ TPO when adhered to approved substrates. For flashing conditions, follow Method of Application two (II) in the link below.
For more information and product specs click here.

Firestone Stick Adhesive
I.S.O.Stick™ Insulation Adhesive
I.S.O.Stick is a two-component, low-rise polyurethane insulation adhesive applied in beads for adhesive attachment of Firestone-approved roof insulations to acceptable substrates as allowed by Firestone specifications. I.S.O.Stick is specifically designed to be dispensed using the Pace Cart 2TM dispenser, which simultaneously pumps I.S.O.Stick Parts 1 and 2 to a static mixer, allowing a properly mixed bead of adhesive to be applied to the receiving substrate. Firestone Building Products standard warranties are available up to a 30-year warranty period. Please refer to the Firestone website at firestonebp.ca for specific warranty requirements.
NOTE: Pace Cart 2 is a registered trademark of OMG, Inc.
For more information and product specs click here.

Firestone ISO Fix
I.S.O. FIX™ II Adhesive
I.S.O.FIX™ II Adhesive is a single component, moisture cured, polyurethane adhesive designed to attach acceptable roof insulations to acceptable substrates. It may also be used to attach multiple layers of insulation. I.S.O.FIX™ II Adhesive can be used to attach insulation under Fully Adhered, Modified Bitumen, and Built-Up roofing systems. I.S.O.FIX™ II Adhesive is dispensed from a pressurized, portable, disposable container using the flexible dispensing hose and dispenser wands sold separately. (Firestone Item Number: W56RACINSH). The maximum slope is 2”:12” (51 mm:305 mm). Firestone Building Products standard warranties are available up to 30-year warranty period. Please refer to the Firestone Technical Database at firestonebp.ca for specific warranty requirements.
For more information and product specs click here.

Firestone Splice Adhesive
Splice Adhesive
Firestone Splice Adhesive (SA-1065) is designed for splicing RubberGard™ membrane flashing, FormFlash™ flashing, and the attachment of field membrane panels to Reinforced Perimeter Fastening Strips, and to metal surfaces as specified in the Firestone RubberGard™ Specifications. It is also used as a primer at seam edges for Lap Sealant application.
For more information and product specs click here.

Sealants

Firestone General Purpose Sealant
General Purpose Sealant
Firestone’s UltraPly™ TPO General Purpose Sealant is a high quality sealant with excellent adhesion to a variety of surfaces. It is for use in conjunction with Firestone UltraPly™ TPO Systems as a fastener sealer, termination bar caulk, and TPO cut edge or seam edge treatment, where required by Firestone details. Additionally, UltraPly™ TPO General Purpose Sealant can be used in non-roofing applications not specifically associated with the initial installation of the roofing system. This sealant can be used to caulk or seal sheet metal, masonry, brick and
concrete block (i.e., sealant by others).
For more information and product specs click here.

Firestone AP Sealant
AP Sealant
AP Sealant is a single-component polyurethane non-sag moisture-curing sealant. It can be used to caulk sheet metal, masonry, brick, and concrete block. It may be used as an exterior sealant at termination bar details and as a fastener sealer over fastener heads per current Firestone Building Products specifications and details.
For more information and product specs click here.

Firestone Lap Sealant
Lap Sealant
Firestone Lap Sealant HS is a low volatile organic compound (LVOC) sealant designed to be used with Firestone Splice Adhesive SA-1065 for seam edge treatment applications and as a sealant in other applications as indicated by current Firestone specifications and details.
For more information and product specs click here.

Firestone Water Block Seal
Water Block Seal
Water Block Seal (S-20) is designed to provide a seal when used in compression as required by Firestone Details.
For more information and product specs click here.

Firestone Pourable Sealer
Pourable Sealant
Firestone Pourable Sealer is a two component sealer designed to create a watertight seal around small pipe penetrations, clusters of pipes, I-beams etc. in a penetration pocket detail.
For more information and product specs click here.

UltraPly™ TPO Cut Edge Sealant

Firestone UltraPly™ TPO Cut Edge Sealant is a polymer based sealant used to seal all cut edges of UltraPly™ TPO Membrane where the polyester reinforcement is exposed. It is available in white, gray and tan.
For more information and product specs click here.


*Note: Not all Firestone products shown are available at all Roofmart locations. For availability contact your local Roofmart branch. Click here for location details.

Categories:   Adhesives & Sealants Commercial Roofing Contractor Homeowner Product Promotional Roofing Vendor

Share:

Top